Detaching Dryers

I. Preparation and Safety:

1. Power Disconnection:

   • Locate the Circuit Breaker: Identify the dedicated 240-volt circuit breaker (double sized breaker) that controls the dryer's power supply.

   • This breaker may also be a 120-volt circuit breaker if it's a gas dryer.

   • There's no reason to disconnect power at the panel.

   • Knowledge of the location of the circuit breaker panel & the outlet that services the appliance you're attempting to disconnect is definitely something you want to find, prior to dealing with the appliance.

2. Gas Disconnection (Gas Dryers):

   • Locate the Homes Gas Shut-Off Valve: As with the electrical power, it's wise to know where the homes gas cut off is in the event of an emergency.

   • Locate the Gas Shut-Off Valve: Find the gas shut-off valve near the gas line connection behind the dryer.

   • Turn Off Gas Valve: Turn the valve to the "OFF" position, usually perpendicular to the gas line.

   • Disconnect Gas Line: Carefully disconnect the gas line from the dryer. Use two wrenches: one to hold the gas valve steady and another to loosen the connector.

   • Cap Gas Line: Have a gas rated cap ready to cap off the line if gas leaks are detected or if the appliance will be disconnected for an extended period of time.

3. Electrical Disconnection:

   • Locate the Plug for the Dryer: Grasp the cord end & pull the plug from the outlet.

4. Ventilation Duct Disconnection:

   • Locate the Vent Duct: Identify the rigid or flexible metal duct connected to the dryer's exhaust outlet.

   • Loosen Clamps or Fasteners: Loosen any clamps, screws, or foil tape securing the duct to the dryer and the wall or vent opening.

   • Detach the Duct: Carefully detach the duct from both the dryer and the wall or vent opening.

   • Report to Management: If you discover buildup in the dryer vent, it's advisable to suggest that the customer have their dryer vent cleaned by a professional.

5. Prepare the Area:

   • Clear a path for moving the dryer. Remove any obstacles or tripping hazards.

   • Detach bi-fold doors: Often this requires detaching of one or both sides of a bi-fold door setup to allow removal. 

   • Protect flooring with cardboard, or moving pads to prevent scratches or damage.

II. Disconnecting and Moving the Dryer:

1. Move the Dryer:

   • Obtain Assistance: Dryers are not generally heavy, but they can be awkward to move. Enlist the help of another person to prevent injury.

   • Careful Lifting and Tilting: Lift it carefully, keeping your back straight, and move it to the desired location.

   • Avoid Dragging: Do not drag the dryer across the floor, as this can cause damage.

   • Use a Hand Truck: Position a packing blanket or cardboard between the dryer & the hand truck. Lift the unit from the front to get it out of it's installation, and then reposition the hand truck to lift from the side. 

   • Store the Dryer: Find a location that's out of the way to allow production work.

2. Hose and Cord Management:

   • Coil the electrical cord (electric dryers) or gas line (gas dryers) neatly.

   • Place the vent into the drum for storage. 

III. Post-Disconnection:

1. Cap Gas Line and Vent (If Applicable): If the gas line or vent opening will not be used immediately, cap them to prevent gas leaks.

Important Considerations:

• If moving a newer heat pump dryer, be aware that these may have no vent assembly, and are more top heavy than traditional dryers.