Safety Training - Scissor Lift Safety Training

1. Pre-Operation Inspection:

• Daily Inspection: Before each use, conduct a thorough inspection of the scissor lift. This includes:

  • Checking for leaks (hydraulic fluid, fuel).

  • Inspecting tires for damage. (normally non-pneumatic)

  • Verifying the functionality of all controls (ground and platform).

  • Testing the emergency lowering system.

  • Inspecting guardrails and toe boards.

  • Checking for any visible damage to the lift structure.

  • Checking for proper function of any safety devices, like tilt sensors.

• Documentation: Record the inspection results in a daily inspection log.

2. Work Area Assessment:

• Surface Conditions: Ensure the work surface is level, firm, and free of obstructions.

• Overhead Hazards: Be aware of overhead power lines, pipes, or other potential obstructions.

• Clearance: Verify that there is adequate clearance for the scissor lift to maneuver and operate safely.

• Wind Conditions: Be aware of wind conditions, as strong winds can cause the lift to become unstable. Follow the manufacturers instructions for wind speed limitations.

• Traffic Control: If working in a traffic area, establish appropriate traffic control measures.

3. Safe Operating Procedures:

• Qualified Operators: Only trained and authorized personnel should operate scissor lifts.

• Fall Protection: Always wear appropriate fall protection, such as a full-body harness and lanyard, when working on a scissor lift. Attach the lanyard to the designated anchor point on the platform.

• Load Limits: Never exceed the lift's rated load capacity.

• Proper Positioning: Position the lift on a stable surface and ensure that outriggers (if equipped) are properly deployed.

• Avoid Movement While Elevated: Do not move the lift while the platform is elevated, unless the lift is specifically designed for this purpose.

• Emergency Procedures: Be familiar with emergency lowering procedures and the location of emergency stop buttons.

• No Climbing or Leaning: Never climb on or lean over the guardrails.

• Keep Feet on the Floor: Always keep your feet firmly on the platform floor.

• Avoid Scaffolding or other platforms: Never use the scissor lift platform as a base for scaffolding, ladders, or other elevating platforms.

4. Hazard Awareness:

• Electrical Hazards: Be aware of the risks of electrocution from overhead power lines.

• Tip-Over Hazards: Understand the factors that can cause a scissor lift to tip over, such as uneven surfaces, overloading, and strong winds.

• Pinch Points: Be aware of pinch points and keep hands and feet clear of moving parts

5. Training:

• Formal Training: All scissor lift operators must receive formal training on safe operating procedures.

• Practical Training: Practical, hands-on training is essential to ensure that operators are competent in operating the lift safely.

• Refresher Training: Regular refresher training is recommended to reinforce safe operating practices.